Aynsley Clock Insert Replacements

 

 

RANGE: 35MM   60MM   65MM   70MM   80MM

Clock inserts measurements represents the diameter of the face of your old clock insert.

e.g. A 35mm replacement clock insert is 35mm (3.5cm or 1 3/8” inches) on the front face rim to rim.

____________________________________________________________________________________________________________________________

Aynsley Miniatures – Accepts all of our 35mm clock inserts  

35mm clock replacement insert now accepts all spindle positions

 

Instructions:

The clock insert is switched on by pressing the spindle wheel in. New inserts are fitted with a small plastic washer clip located behind the spindle wheel. It slides off when you pull out the spindle.

Battery Replacement – Your local jeweller should be able to supply and fit a new battery (AG4)

DIY – Remove the back of the insert using a small precision screw driver there is a small pryar notch, for the screw driver to fit.  Leaver carefully. Remove battery and replace with new.

Close the back lining up the spindle with the gap.

 

                 

BUY NOW FROM UK CHINA DIRECT  

 

 

 

Rounded Rectangle: £18.80
 

 

 

 

 

 

 

 

 

 

 

 

 


Supplied with a new back plate*. Battery, 12 months defect warranty and UK P&P.

 

 

(*Back plate – For replacement purposes the back plate is not required)

BATTERY REPLACEMENT REQUIRES AG4

 

Double check the diameter of the front face (Rim to rim) on your old insert and it should match up with the new 35mm.

Previously the older inserts the spindle position was at 6 o’clock today Aynsley’s latest production the spindle is at 3 o’clock. The UK China Direct has produced a universal spindle position and be used in both clocks.

 

________________________________________________________________________________________________________________________

 

60mm  clock replacements covers the small arch and Dutch clocks the back of the insert now uses a rubber gripper to fit a 55mm aperture.

 

There is no second hand because of the curve of the glass.

 

Same size as the alarm insert

 

Remove the paper battery connector to start the clock. The E90 battery is used.

BUY NOW FROM UK CHINA DIRECT

 

 

BATTERY REPLACEMENT REQUIRES E90

 

Double check the diameter of the front face (Rim to rim) on your old insert and it should match up with the new 60mm.

Rounded Rectangle: £18.80
 

 

 

 


65mm clock replacements covers the Alarm clocks (The alarm feature is no longer available) the back of the insert now uses a rubber gripper to fit a 50- 55mm aperture.

 

The above shows the full range based on the Howard Spray pattern. The 65mm has no second hand.

 

Rounded Rectangle: £18.80

BUY NOW FROM UK CHINA DIRECT

 

 

 

 

 

 

BATTERY REPLACEMENT REQUIRES E90

 

Remove the paper battery connector to start the clock. The E90 battery is used.

Double check the diameter of the front face (Rim to rim) on your old insert and it should match up with the new 65mm.

 

 

________________________________________________________________________________________________________________________

70-75mm clock replacements covers the Mantel, Napoleon also some of the Portland clock range – Regency, Georgian & Empire.

 The back of the insert now uses a rubber gripper to fit a 50- 55mm aperture.

 

BUY FROM UK CHINA DIRECT

 

£18.80

 

________________________________________________________________________________________________________________________

 

80mm clock replacements covers the wall clocks the Bracket and Regent.

BUY NOW FROM UK CHINA DIRECT

 

£18.80

Buy now here

 

Remove the paper battery connector to start the clock. The E90 battery is used.

 

Double check the diameter of the front face (Rim to rim) on your old insert and it should match up with the new 80mm.

 

 

Classic Clock 65mm

Mantel Clock 70mm

Arch Clock 60mm

Desk Clock 35mm